org.quartz
Interface CalendarIntervalTrigger

All Superinterfaces:

Cloneable, Comparable<Trigger>, Serializable, Trigger

All Known Implementing Classes:

CalendarIntervalTriggerImpl

public interface CalendarIntervalTrigger
extends Trigger

A concrete Trigger that is used to fire a JobDetail based upon repeating calendar time intervals.

The trigger will fire every N (see #setRepeatInterval(int) ) units of calendar time (see #setRepeatIntervalUnit(IntervalUnit)) as specified in the trigger's definition. This trigger can achieve schedules that are not possible with SimpleTrigger (e.g because months are not a fixed number of seconds) or CronTrigger (e.g. because "every 5 months" is not an even divisor of 12).

If you use an interval unit of MONTH then care should be taken when setting a startTime value that is on a day near the end of the month. For example, if you choose a start time that occurs on January 31st, and have a trigger with unit MONTH and interval 1, then the next fire time will be February 28th, and the next time after that will be March 28th - and essentially each subsequent firing will occur on the 28th of the month, even if a 31st day exists. If you want a trigger that always fires on the last day of the month - regardless of the number of days in the month, you should use CronTrigger.

Author:

James House

See Also:

TriggerBuilder, CalendarIntervalScheduleBuilder, SimpleScheduleBuilder, CronScheduleBuilder

Nested Class Summary

Nested classes/interfaces inherited from interface org.quartz.Trigger

Trigger.CompletedExecutionInstruction, Trigger.TriggerState, Trigger.TriggerTimeComparator

Field Summary

static int	MISFIRE_INSTRUCTION_DO_NOTHING Instructs the Scheduler that upon a mis-fire situation, the CalendarIntervalTrigger wants to have it's next-fire-time updated to the next time in the schedule after the current time (taking into account any associated Calendar, but it does not want to be fired now.
static int	MISFIRE_INSTRUCTION_FIRE_ONCE_NOW Instructs the Scheduler that upon a mis-fire situation, the CalendarIntervalTrigger wants to be fired now by Scheduler.

Fields inherited from interface org.quartz.Trigger

DEFAULT_PRIORITY, MISFIRE_INSTRUCTION_IGNORE_MISFIRE_POLICY, MISFIRE_INSTRUCTION_SMART_POLICY, serialVersionUID

Method Summary

int	getRepeatInterval() Get the the time interval that will be added to the DateIntervalTrigger's fire time (in the set repeat interval unit) in order to calculate the time of the next trigger repeat.
DateBuilder.IntervalUnit	getRepeatIntervalUnit() Get the interval unit - the time unit on with the interval applies.
int	getTimesTriggered() Get the number of times the DateIntervalTrigger has already fired.
TimeZone	getTimeZone() Gets the time zone within which time calculations related to this trigger will be performed.
TriggerBuilder<CalendarIntervalTrigger>	getTriggerBuilder() Get a TriggerBuilder that is configured to produce a Trigger identical to this one.
boolean	isPreserveHourOfDayAcrossDaylightSavings() If intervals are a day or greater, this property (set to true) will cause the firing of the trigger to always occur at the same time of day, (the time of day of the startTime) regardless of daylight saving time transitions.
boolean	isSkipDayIfHourDoesNotExist() If intervals are a day or greater, and preserveHourOfDayAcrossDaylightSavings property is set to true, and the hour of the day does not exist on a given day for which the trigger would fire, the day will be skipped and the trigger advanced a second interval if this property is set to true.

Methods inherited from interface org.quartz.Trigger

compareTo, equals, getCalendarName, getDescription, getEndTime, getFinalFireTime, getFireTimeAfter, getJobDataMap, getJobKey, getKey, getMisfireInstruction, getNextFireTime, getPreviousFireTime, getPriority, getScheduleBuilder, getStartTime, mayFireAgain

Field Detail

MISFIRE_INSTRUCTION_FIRE_ONCE_NOW

static final int MISFIRE_INSTRUCTION_FIRE_ONCE_NOW

Instructs the Scheduler that upon a mis-fire situation, the CalendarIntervalTrigger wants to be fired now by Scheduler.

See Also:

Constant Field Values

MISFIRE_INSTRUCTION_DO_NOTHING

static final int MISFIRE_INSTRUCTION_DO_NOTHING

Instructs the Scheduler that upon a mis-fire situation, the CalendarIntervalTrigger wants to have it's next-fire-time updated to the next time in the schedule after the current time (taking into account any associated Calendar, but it does not want to be fired now.

See Also:

Constant Field Values

Method Detail

getRepeatIntervalUnit

DateBuilder.IntervalUnit getRepeatIntervalUnit()

Get the interval unit - the time unit on with the interval applies.

getRepeatInterval

int getRepeatInterval()

Get the the time interval that will be added to the DateIntervalTrigger's fire time (in the set repeat interval unit) in order to calculate the time of the next trigger repeat.

getTimesTriggered

int getTimesTriggered()

Get the number of times the DateIntervalTrigger has already fired.

getTimeZone

TimeZone getTimeZone()

Gets the time zone within which time calculations related to this trigger will be performed.

If null, the system default TimeZone will be used.

isPreserveHourOfDayAcrossDaylightSavings

boolean isPreserveHourOfDayAcrossDaylightSavings()

If intervals are a day or greater, this property (set to true) will cause the firing of the trigger to always occur at the same time of day, (the time of day of the startTime) regardless of daylight saving time transitions. Default value is false.

For example, without the property set, your trigger may have a start time of 9:00 am on March 1st, and a repeat interval of 2 days. But after the daylight saving transition occurs, the trigger may start firing at 8:00 am every other day.

If however, the time of day does not exist on a given day to fire (e.g. 2:00 am in the United States on the days of daylight saving transition), the trigger will go ahead and fire one hour off on that day, and then resume the normal hour on other days. If you wish for the trigger to never fire at the "wrong" hour, then you should set the property skipDayIfHourDoesNotExist.

See Also:

isSkipDayIfHourDoesNotExist(), Trigger.getStartTime(), getTimeZone()

isSkipDayIfHourDoesNotExist

boolean isSkipDayIfHourDoesNotExist()

If intervals are a day or greater, and preserveHourOfDayAcrossDaylightSavings property is set to true, and the hour of the day does not exist on a given day for which the trigger would fire, the day will be skipped and the trigger advanced a second interval if this property is set to true. Defaults to false.

CAUTION! If you enable this property, and your hour of day happens to be that of daylight savings transition (e.g. 2:00 am in the United States) and the trigger's interval would have had the trigger fire on that day, then you may actually completely miss a firing on the day of transition if that hour of day does not exist on that day! In such a case the next fire time of the trigger will be computed as double (if the interval is 2 days, then a span of 4 days between firings will occur).

See Also:

isPreserveHourOfDayAcrossDaylightSavings()

getTriggerBuilder

TriggerBuilder<CalendarIntervalTrigger> getTriggerBuilder()

Description copied from interface: Trigger

Get a TriggerBuilder that is configured to produce a Trigger identical to this one.

Specified by:

getTriggerBuilder in interface Trigger

See Also:

Trigger.getScheduleBuilder()